HOTLINE: Mo.-Fr. von 8.00-12.00 u. 14.00-17.00 Uhr Tel.: +49 (0)2831/133236 Consultation and service to our CNC milling maschines/CNC milling cutter

www.cnc-step.com

we provide for movement

Portal CNC-Router Milling and Engraving Machines - Series High-Z / Details

Prices are inclusive German 19% VAT

Our worldwide distributors:

We are sponsors from:

We are looking for new resellers for USA and swizerland ! Click here.

Last Update: 31.10.2009

All High-Z Machines have an maximum repetition accuracy from approx 0,02mm-0,03mm ( 20-30µm)

CNC-Milling Machine HIGH-Z S-400:

• Drive : 4 stepping motor by Nanotec with 1600 steps/rev    (1/8 Step)
• 2 motors for constant tension and compression during milling operation on X-Axis
• Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
• Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
• Traverse speed of rapid feed max. 3000 mm/min
• Technical disslution 0,00187 mm ( 1/8 Schritt )
• Table size / clamping area: 730 x 400 mm
• Traverse Paths: X=400 mm; Y=300 mm; Z= 110 mm
• Reference- and limit switch on all axes
• Double safety emergency stop button
• Energy chain for clean cabling
• Total dinemsions incl motors : LxWxH = appr. 730x520x500mm
• Milling Motor anchorage: Euroneck Ø43mm
• incl. Software PC-NC or WIN PCNC Light
• Modular frame for universal application
• Weight appr. 31 kg                                                  
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere        2237,00 Euro incl VAT

CNC-Milling Machine HIGH-Z S-720:

• Drive : 4 stepping motor by Nanotec with 1600 steps/rev    (1/8 Step)
• 2 motors for constant tension and compression during milling operation on X-Axis
• Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
• Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
• Traverse speed of rapid feed max. 2500 mm/min
• Technical disslution 0,00187 mm ( 1/8 Schritt )
• Table size / clamping area:1050 x 520 mm
• Traverse Paths: X=720 mm; Y=420 mm; Z= 110 mm
• Reference- and limit switch on all axes
• double secured emergency stop button
• Energy chain for clean cabling
• Total dinemsions incl motors : LxWxH = appr.1070x690x500mm
• Milling Motor anchorage: Euroneck Ø43mm
• incl. Software PC-NC or WIN PCNC Light
• Modular frame for universal application
• Weight appr. 41 kg                                            
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere                    2793,00 Euro incl VAT

CNC-Milling Machine HIGH-Z S-1000:

Same as HIGH-Z S720 and S400 except:

• Drive : 4 stepping motor by Nanotec with 1600 steps/rev    (1/8 Step)
• 2 motors for constant tension and compression during milling operation on X-Axis
• Guide ways X and Y axle 22 mm / Z Axis 16mm, grinded and with 61hrc hardened surface 
• Ball bearings at both sides of trapezium spindles Tr. 12x3 mm flank lead
• Traverse speed of rapid feed max. 2000 mm/min
• Technical disslution 0,00187 mm ( 1/8 Schritt )
• Table size / clamping area:1330 x 680 mm
• Traverse Paths: X=1000 mm; Y=600 mm; Z= 110 mm
• Reference- and limit switch on all axes
• double secured emergency stop button
• Energy chain for clean cabling
• Total dinemsions incl motors : LxWxH = appr.1350x840x500mm
• Milling Motor anchorage: Euroneck Ø43mm
• incl. Software PC-NC or WIN PCNC Light
• Modular frame for universal application
• Weight appr. 51 kg                                            
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere                  3343,00 Euro inkl VAT

CNC-Milling Machine HIGH-Z S-1400:

Same as HIGH-Z S720 and S400 except:

• Price is includet T-Groove plate and Kress milling motor 1050 Watt incl 8mm collet ( shown underframe optional )
• Drive : 4 stepping motor by Nanotec with 1600 steps/rev    (1/8 Step)
• 2 motors for constant tension and compression during milling operation on X-Axis
• Guide ways X 22mm and Y axle 30 mm / Z Axis 16mm, grinded and with 61hrc hardened surface
• Additional linear guide rails 15mm from HIWIN for the X Axis  
• Ball bearings at both sides of trapezium spindles Tr. 16x4 mm flank lead
• Two Tr16 Nuts ( one nylatron, one red brass ) at X and Y axcis for adjustable backlash
• Traverse speed of rapid feed max. approx. 2000 mm/min
• Technical disslution 0,0025 mm ( 1/8 Step )
• Table size / clamping area:1730 x 880 mm
• Traverse Paths: X=1400 mm; Y=800 mm; Z= 110 mm
• Reference- and limit switch on all axes
• double secured emergency stop button
• Energy chain for clean cabling
• Total dinemsions incl motors : LxWxH = appr.1750x1040x500mm
• Milling Motor anchorage: Euroneck Ø43mm
• incl. Software PC-NC or WIN PCNC Light
• Modular frame for universal application ( shown underframe optional, 980 Euro incl VAT )
• Weight appr. 76 kg                                            
• Complete machine Includet 4 driver microstep controller 4x 2,1 Ampere                  7625,00 Euro inkl VAT

Please allow for leading time of approx. 3 – 4 weeks.  We do not stock our products, therefore we can offer a special production time of 5 working days for an additional 10% of the base price.

Technical Data for High-Torque Stepping motors used

Note On the motor you will find a sign saying 2.0A stating the maximum performance in normal operation. We have chosen a Bipolar driving device for improved performance, which allows the usage of 2.8A.

Stepping Motor Controller Microcontroller:

Specifications microstep-controller for S-400, S-720 and S-1000:

1/8 Microstep controller 4 channel:

• 4 Channel Control
• electricity up to 2,1A per phase
• 4 connections for motors, 1 connection for 4 end emergenzy stop button
• Anschluss an PC-Parallelport
• Microstep control 1/8 Step
• „Sleep-function“ to decrease usage of power in Standby mode.
• Protection against overpowering through high voltage
• Power supply unit
• ALU cooling unit / 2 ventilators, 1 no. 80 and 1 no. 50 .
• connection oprions of 5 limit- or reference switch and emergency stop button
• All connections for motor and limit switches at 9 Pol sub D.
• 5 channel stepping motor control  ( eg. to operate an additional 4th axis or tangential measurer) 149 Euro towards total price of machine.
• Available with 110, 230 and 240 Volt for Unitet Kingdom and other countries

Note:  CNC-Step does not supply individual controllers!  We only provide controllers whith purchase of a CNC-Milling Machine

We also offer these machines on e-bay.

When purchasing our products on E-Bay you will receive a small discount. We thank you with a 99.9% positive feedback. This positive advertisement is worth a discount. 

We trust that you kindly understand that we cannot give any further discount than the ones on E-Bay, whereas we do not receive any service in return.

By the way…despite our e-bay offers we sell almost 85% of our machines via e-mail or fax.

o