Order Number

Product Description

Price apiece
incl VAT

HZ 1001

Full version PCNC ( is alternatively contained in place of WIN PCNC light in the scope of supply of the machinest )

149,00 €

HZ 1001a

Full Version WIN PCNC Light ( is alternatively contained in place of PCNC in the scope of supply of the machine )

HZ 1002

Full version WIN PCNC Profi inclusive spec. controller ( surcharge with the purchase of a machine, PCNC or WIN PCNC light not supplied )

756,00 €

HZ 1002a

Full version WIN PCNC Profi

905,00 €

HZ 1002b

Full version WIN PCNC Economy ( sucharge with the acquisition of a CNC milling machine ) price per unit without acquisition of a machine 278 Euro

HZ 1002c

Full version WIN PCNC Economy

278,00 €

HZ 1003

1/8 Microstep controller 4 channel for connection up to 4engines to  2,1A

498,00 €

HZ 1004

1/8 microstep control 5 channel for the connection up to the 4-channel control

149,00 €

HZ 1101

Relay housings spindle/cooling with 2 plug sockets

98,00 €

HZ 1005

Knife holder with 43er admission to foil cuts with pressure adjustment

149,00 €

HZ 1006

T-groove plate for S-400 aluminum anodizes 2 pieces mann: 32x73cm 16mm thick

116,80 €

HZ 1007

T-groove plate for S-720 aluminum anodizes 3-pieces : 48x105cm 16mm thick

252,00 €

HZ 1008

T-groovet plate for the S-1000 aluminum anodizes 4 pieces: 64x133cm 16mm thick

425,60 €

HZ 1009

T-groove plate, self clamping, M6 10 pieces oer pack

18,00 €

HZ 1010

Steel clamp with 7mm long hole

7,95 €

HZ 1011

Kress milling engine / milling spindle 1050 watts electronic regulation inclusive clamping device 8mm

159,00 €

HZ 1012

Kress clamping device 2,35mm for Proxxon or Dremel drill etc.

29,00 €

HZ 1013

Clamping device sets for Kress milling spindle 3mm, 1/8 tariff, 6mm

72,00 €

HZ 1014

Trend milling engine/ milling spindle 550 watts of inclusive 4 clamping device, 3mm, 6mm, 8mm, 1/4”

149,00 €

HZ 1015

Scan1000 Pro / 3D scanner incl. sensoring device

289,00 €

HZ 1016

Tool-100 / device for establishing tool length

229,00 €

HZ 1017

VHM drill bits for all materials 0,5/0,6/0,8/1,0/1,5/2,0/2,5/3,0/3,5/4,0mm sets of 10 with 1/8 tariffl shaft image 1, image 2

39,00 €

HZ 1018

Milling bit, diamond cut for timber, MDF und carbon fibre 2mm, 3mm top quality, per pieces

8,95 €

HZ 1019

Milling bit for aluminum, perpex, brass VHM 2mm, 3mm, proce per piece

14,95 €

HZ 1020

Engraving tool set of 10 0,1-1,5mm line width, various engraving angles for brass, plastics etc.

139,00 €

HZ 1021

Adapter Spindle from 43h7 to 20H7 for Proxxon Spindle

29,00 €

HZ 1022

Minimal lubrication system,  Spray cooling device for small compressors

169,00 €

HZ 1022a

Spray cooling, connection with a smal compressor by flexible PVC tubes

129,00 €

HZ 1023

Exhaust for connection to vaccum cleaber or exhaust

89,00 €

HZ 1024

17 a line writings for engraving and milling/professional writings/a line writing

119,00 €

HZ 1025

4fourth axle, CNC turntable, axis of rotation RounDINO 120, ready for installation

1.198,00 €

HZ 1026

3 cheek fodder suitably for RounDino 120, 80mm diameter

129,00 €

HZ 1027

3D ScanPlus-Pro-Kit incl. software, lamp, 1 kg impressive mass 

498,00 €

HZ 1028

Drechsel-Kit “Frächsel” incl. motor, t-groove plate  

859,00 €

Amazing stl.-files / hundrets of very good stl.- 3D files for very small prices !!

                               HF-Spindles              

Order Number

Mill lists

F112

Here you find a  Word or a PDF price list to the driill F112

F113

Here you find a Word or a PDF price list to the drill  F113

F120

Here you find a  Word or a PDF price list to the drill  F120

F126

Here you find a Word or  PDF price list to the drill F126