CNC news router


		HOTLINE: Mo.-Fr. von 8.00-12.00 u. 14.00-17.00 Uhr Tel.: +49 (0)2831/133236 Consultation and service to our CNC milling maschines/CNC milling cutter
		www.cnc-step.com

			we provide for movement


	NEWS

		14.10.2006: The long desired axis of rotation is finally available.ie It has for a long time lasted however a waiting for all was worthwhile oneself. The new axis of rotation of CNC Step has instustrial qualities. Then are with minimum shail reversal play of approximately 5,9 minutes and one retaining moment of 20 Nm outstanding for all 3 D mill and engraving work well as dividing head work suitable. 16.09.2006: We welcome the 200000 visitors on the InterNet operational readiness level www.cnc-step.com. Uour long files piont momentarily approx.50000 klicks per week up. Over 50 videos and approx...200large pictures our products to the customers worldwide. 01.09.2006: The High-Z T-Serie mwith ball screws goes to the start. Cruise of up to 6500mm/min are realizable. Thus the plants are new also usable dosing`s applications. 24.08.2006: The 400 High-Z Maschine goes into Iran at Mr. Jali. We wish much success with the machine. Meanwhile we sell nearly 40% of the machines abroad word-wide. Thus is probably the High-Z series the most successful and most usually-sold CNC portal milling machine. 01.08.2006: A further new coworker For the range assembly and sales is adjusted mr. Schimpf. It presents an energetic support and to the company in your further rising will be helpful. 04.06.2006: The english-speaking Page cnc-router-routers.com goes into the net Due to the fact that already each fourth E-mail inquiry is English-language decides we short hand, the page in english language to be appcared to be able. 14.05.2006: CNC-STEP under then Top-3 in Google durring the input of “cnc-milling machine”. We have it to be found production real.New record attendance on the page are result. 16.04.2006: New sales partner in den USA is immediately the company cncrus.com under the direction of Mr. Welch. 14.02.2006: New sales partner in the USA is immediately the company cnc-tables.com 10.08.2005: New partner for sotware becomes the company AH-Softgravur. Most diverse software variants stand to the selection 14.06.2005: Small anniversary: The 100. High-Z plant is sold. eSince to the sales start to 20.02.05 up to 14.06.06 world wide 100 milling machines are sold. 23.05.2005: New partnerof the company CNC-STEP ist die Fa. Filou. The software Desk Proto is taken up to the program. The post prosessor for the High-Z in the software embodies. Mr Woestmann of the company Filou stands for us with advice and act to the side. Thanks you for it here. 04.05.2005: First High-Z sets over to the USA after California to Mr. Fluhrer from Pleasant Hill. 01.05.2005: New coworker of the company CNC-STEP becomes Mr. Lutter. Field assembly and product development. 26.04.2005: The 50 High-Z plant buys Mr. Oppermann. 31.03.2005: The 25. High-Z plant buys the company Nidetzky Electronics. The first High-Z the european union leaves and to Switzerland is supplied. 21.02.2005: Largley world-wide advertising campaign put on in the Tnernet begins. The page www.cnc-step.com is revised and optimized. 20.02.2005: Sales of the first High-Z S-1000. Mr. becker from Bergheim in Germany buys the first High-Z S-1000. Mr. Becker by the way works for now well 15 month daily up to 8 Hours with the machine and works on predominatly plexglass. Admits is it many usern in our small forum under the name “Saugmann”. 14.02.2005: Conclusion of the CE-conformity inclusive danger analysis The manual is finished. Responsible for this the office is Kothes in Wachtendonk in Germany. 11.02.2005: EMV examination of the control and machine The EMV examination necessary for the CE conformity is made. 15.12.2004: New partner of the company CNC-STEP becomes engineer of the office Lewetz, responsible for software development. 16.11.2004: Engines of Nanotec As stepping motors for the High-Z are to be used engines of the manufactures Nanotec at the High-Z. 15.08.2004: Engineer`s office Piontek as new partner The engineer`s office W. Piontek from Dortmund in germany explains itself ready to take over the electronic part for the High-Z and becomes responsible for the development of the control for the High-Z. 10.06.2004: It states development start of the High-Z We that there are no really sturdy and above all accurately working CNC small milling machines with smallest manufacturing mad satches and a tidy price performance ratio on the market of the portal milling machine. Starting signal for the development of the High-Z.